Lion Sleeps Through Moving Mice – A Frustrating Enhancement

Image of Lion From OS X Lion

Image of Lion From OS X LionLion has brought a frustrating new feature even if it does make sense. Since first using Lion I’ve noticed that moving the mouse doesn’t reactivate the screen if it’s in power saver mode. Since I first encountered this on MacBooks with trackpads I simply tapped the spacebar to wake the machine. Barely a stretch from the trackpad.

But then I put Lion on my desktop Mac Mini and the feature became a frustration. The Mini shares a keyboard and mouse with my Windows 7 machine via Synergy,. The mouse/keyboard are physically on the Windows 7 machine which is the Synergy server. So the problem was the shared mouse wouldn’t activate the Mac Mini screen and the Synergy keyboard was ignored with the display asleep. I do have a keyboard and mouse always attached to the Mini, but they’re tucked away so it was a pain to tap that keyboard.

I found that clicking the mouse (or trackpad) wakes the screen, at least when the mouse is physically attached. But Synergy is still a problem. Even though the mouse appears to go over to the Mini’s screen, tapping a key or clicking the mouse won’t wake the Mini. But a least it’s easier to keep the trackball under the monitor so I can click it rather than digging out the keyboard. So it’s a partial solution.

I certainly see the benefits of this behavior since it would prevent waking the computer with an accidental brush of the mouse. But I wish there was a way to turn this off since it’s the exact opposite of my usage as I’m more likely to want to nudge the mouse to activate the screen. Personally, I rarely nudge the mouse and accidentally wake the PC. In addition to the Synergy annoyance,

Another tip is to use the application Caffeine to disable automatic sleep for a specified time, or indefinitely. This doesn’t solve the problem, but it can avoid power saving while I’m working at my desk. Caffeine is freeware and available from the Mac App Store or from the website.

OS Quest Trail Log #62: Mid-Summer Edition

A Desert Scene

We finally got the summer heatwave here in the eastern U.S. and it was a good time to stay inside where it’s air conditioned. All-in-all a good time for being at the PC. Even if the heat they generate make the air conditioning work harder.

Website Updates

WordPress 3.2 was released at the beginning of the month and the the inevitable WordPress 3.2.1 followed soon after. Between those two releases I trashed my just implemented site redesign and went with a new design which held truer to the previous design. It was made possible by possible by a time saving WordPress plugin.

Overall it’s gone pretty well with just a few speed bumps along the way. I still have a couple open issues. The most annoying is I can no longer use tools that connect via xmlrpc such as Windows Live Writer and MarsEdit. They just give an xmlrpc error when connecting. Google searches show a few potential causes with solutions. None of those solutions worked for me. The problem seemd to coincide with the 3.2.1 upgrade although it had been awhile before that since I used Windows Live Writer and there were a few other changes during that time. Usualy troubleshooting such as turning off all plugins and reverting to the default theme didn’t eliminate the problem So it seems to be a WordPress or server issue.

SpiderOak In – Dropbox Out

I finally got fed up enough with Dropbox and decided to find an alternative. There’s still nothing than Dropbox for syncing between mobile devices and computers. Especially since a lot of apps integrate Dropbox support. Still, I decided to go with SpiderOak and have been happy with it.

As Alan said in a comment to my post, Dropbox is the clear winner when it comes to syncing while SpiderOak is a clear security winner and better backup client. I decided to go with a paid account to have the extra space. I’ve been using it for backing up my Windows Home Server in addition to my Macs and Windows PCs. It’s been working well.

I’ve also been using it to sync and it’s been working but it only syncs after backing up which is a potential problem, although mainly during the initial backup phase where backups take a long time which could delay syncs. So far it hasn’t been a problem. I back up very little from my PCs while most syncing is PC to PC so the timing hasn’t been a problem.

I’ve also been testing it as a backup for my Windows Home Server 2011. I’m not particularly enthused that there’s no add-in or official server support. But at least SpiderOak did publish an article for getting it to work on a server and without having a user logged on. Although for the most part I have a log on session always open through RDP.

I still haven’t been using it long enough to be completely sold on SpiderOak, but I like what I see so far. Next step will be to try and get it working as a backup for my web server.

New MacBook Air and Lion

As I already mentioned, Apple sucked me into replacing my MacBook Air. I’ve had the new Air for just under a week and love it. It’s peppier than my older Air, naturally. For the most part that wasn’t a huge benefit and more power doesn’t let me read or type any faster. But I just built a couple VMs on it and there is a noticeable improvement there. Plus, as I begin to use it more I’ll be running more apps simultaneously.

I upgraded my old MacBook Air to Lion and the new MacBook Air came with Lion pre-installed. So far I’ve only used Lion on the Airs and have to say Lion seems better suited for a laptop with a trackpad and relatively small screen. The big trackpad on the Air makes Lion that much easier to use. I’ve yet to put Lion on any desktop Mac since I use trackballs with scroll wheels on them. To make matters worse I either share a keyboard/mouse with a Windows PC (through Synergy) or RDP into the Mac.

With any new software or upgrade I like to stick with any out-of-the-box settings for as long as possible. If for no other reason than it makes it that much easier to move from computer to computer. So I’ve been sticking with the Lion defaults. I got used to the scrolling quicker than I thought I would. Extremely annoying at first, but more natural in a day or two. I still scroll wrong every now and then but my muscle memory is learning the difference between a mouse and trackpad. I’m not sure I buy the argument that it’s “natural” but I do admit it makes sense and maybe someone who’s never used a computer would find it natural. It’s not like Apple didn’t understand the change. After firing up Lion there’s an intro video on scrolling and you have to pass a “scrolling test” before getting into Lion.

It took awhile but I finally got the new MacBook Air configured and can start using it as my daily computer. It’s time to format the old Air and ship it off so I’ll should get a better feel for Lion pretty quick. I don’t find the gestures or pieces of the interface all that intuitive so it’ll take some time to learn them.

Home Entertainment

In the last Trail Log I mentioned that my living room finally entered the 21st century with a LED TV. I added a LG BD570 Blu-ray player. The main reasons I picked it where the built-in wireless along with DLNA support and a USB port should the DLNA fail. I was pleasantly surprised that the streaming worked with Windows Home Server 2011 running on my HP MicroServer. I was a little concerned the HP wouldn’t have the processing power but it’s been working fine so far.

I have had problems with the LG player playing some of my video encodes. It’s not related to Windows Home Server since the files also fail when played through the USB drive. I’ve yet to figure out what the problem is as the files play elsewhere and I encode all my videos with the same Handbrake settings, yet only a few have problems.

On Tap

Coming up in August I’ll get more familiar with Lion. That’s unavoidable since it’s on my Air which is a PC I use every day, There’s a few website related things to work on – setting up SpiderOak for backing up and a couple minor issues.

Beyond that we’ll have to see what comes up.