It was another slow month on the quest as real life tended to intrude and some best laid plans went bad.
I had been working on setting up remote access to multiple servers through pfSense and thought I had things worked out. I’d even posted the introductory article. Then two things happened. First, a IP address change for my cable modem didn’t make it’s way to updating DNS. My previous testing had been to force an address change which required restarting the modem and changing its spoofed mac address. So in other words, a hardware reset and configuration change. This time the routing ip address change was detected, but failed to make it’s way to the DNS records. So I made some config changes but will have to wait until Comcast changes my IP again so I can see if it helps.
The second item was a comment by Jared that turned on a light bulb. He mentioned about using layer 7 for the routing which is something pfSense can’t do. But, I also have Untangle and had used it as a router in the past. The light bulb went off because Untangle works on Layer 7 so should be able to route based upon the destination address. So I’ll be looking at switching back the Untangle again if it can doe this without having to do port mapping which will greatly simplify things.
This is one of those times I wished I had built the router on a VM and could just fire up different virtual machines for testing. But the MicroServers are the next best thing since I can just swap out hard drives for my testing purposed and not lose the old configuration.
Further complicating things was the death of my version 1 Windows Home Server. It wasn’t unexpected and in fact the server had been replaced, just not stripped for parts. The problem presents as a bad hard drive but if history repeats itself it will be another bad sata port on the motherboard. Not worth fixing so it’s time to yank the drives and reuse them. I’ll build another WHS V1 as a virtual machine for my testing purposes.
CrashPlan Backup Status
CrashPlan ran into it’s first hiccups this month. There was a day long network outage back on Nov 14th. In my case CrashPlan said it couldn’t connect long after they posted the issue was resolved. I went in and manually told it to connect and it immediately started backing up again.
I had a second issue where at exactly 1AM (my time) the backup stopped and CrashPlan wouldn’t connect. But this time I could connect to my account over the web so it wasn’t the same type of problem as before. A quick search of the CrashPlan website revealed and old technote on this problem with the solution being to restart the CrashPlan server or the entire PC. I opted for a server reboot and that did resolve the problem.
Since those outages I’ve also noticed that the top upload speed I see is generally slower. In the past I would frequently see it nearing it’s 2 Mbps upload ceiling (that I configured) where as now it hovers around 1 Mbps. There could be any of a dozen other things affecting this speed but I do see speeds greater than 2 Mbps up when I test other transfers (like a file to my web server).
I haven’t soured on CrashPlan. It’s a low cost service $42/yr (after a discount) for unlimited backup. Test restores worked fine after these outages so it does appear this was a network problem and not a problem affecting data.
As for what’s backed up I’ve been hindered more by Comcast’s data caps than CrashPlan’s capacity. I’ve backed up 178.4 GB consisting of 231,297 files. At this point I’m trying to decide what else I want to back up, There’s no point in backing up my movies as they are so large it could take me years to back them up and stay below my cap. And if I ever had to restore them doing so online would also take years and I probably wouldn’t want to pay to have the hard drives shipped. Any sort of backup to a friends computer would have the same data cap issue so while that’s a nice feature the CrashPlan online solution seems more reliable, despite recent problems.
Holiday Tech Deals
I pretty much avoided any Black Friday/Cyber Monday deals. I didn’t see much that I wanted or see anything I knew was a good deal (as opposed to the merchant just promoting it as a good deal) and I could use. The one exception was a NewEgg deal for the HP MicroServer. At $250 it was a good deal and while I don’t need a sixth for my collection it was tempting. By the time I talked myself into taking a look at it they were sold out.
I did buy some discounted iTunes gift cards from Apple and Best Buy. I use them instead of a credit card both for safety and as a way to budget my expenses in an environment where it’s much too easy to buy things.
I do suspect we’ll see additional deals between now and Christmas so I’ll keep checking. Anyone see a good deal they’d recommend?
Domain Price Increases
If you own any domains be aware that the registry fee Verisign charges for .com domains will go up 51 cents (5%) and .net domains will go up 46 cents (10%) on January 15th. The increase is not retroactive so you can extend your registration at the current prices before that time. Whether your registrar increases their prices and by how much is up to them and can vary. I’m sure some will bump their prices by the percentage rather than the actual increase. You can register .com and .net domains for up to 10 years into the future and I’ve done that for this domain along with a couple others I know I’ll want to keep.
The Month Ahead
With the December holidays things are likely to be busy in the non-tech parts of life but I do have some vacation days during December which may make up for that lost time. I’ll be giving Untangle another try as a router to see if it can better handle the remote access. Beyond that we’ll see what pops up and catches my attention.