New Hosting and New Domain

It’s been awhile since this site was active. It’s not really active now, but it does have a new name and a new domain.

This site has been dormant nearly two years, with the most recent post made in June 2015. This post doesn’t really qualify as re-activating the site. But I did make some changes and it’s likely I’ll be posting here a bit more.

I moved this site to WordPress.com hosting when I shut down my Linode VPS in 2014. I’m back on a Linode VPS server and I’ve moved this site back to being a self-hosted WordPress site. I kept the same theme and didn’t make any cosmetic changes so it shouldn’t be noticeable.

The migration went remarkably well. There’s a lot of graphics and images missing from older posts, but these went missing when I imported them into the WordPress.com site three years ago. I never got around to fixing them at that time. This time I went through and removed the broken/missing images and broken links from the posts. I did indicate in the affected post that old images and links were removed. Most were of old and obsolete software. Missing images were fairly easy to find so I think I got all of them, there are probably broken links remaining since I didn’t really dig in to find them. Cleanup will continue.

I also changed the domain name. When I started the site back in 2006 the domain osquest.com wasn’t available (not at a price I wanted to pay), so I used theosquest.com. After ignoring solicitations to sell me the domain, osquest.com was dropped and I was able to register it a few years ago. I finally got up the nerve to make the change and now use this as the URL. All the redirects seem to be working.

I haven’t been able to test the RSS feed to verify that it redirects successfully. This post will let me know. But the site has been inactive so long I doubt anyone will notice. If you do subscribe via RSS I suggest you switch to the new feed to avoid future issues.

If nothing else, the site may see some activity as I write about the site move and WordPress setup.

Synology Updates Cloud Sync for DSM

Synology has updated their Cloud Sync package for DSM

Synology has released Cloud Sync version 1.0-0378, In addition to several fixes it adds support for Amazon Cloud Drive and improves WebDAV compatibility.

The complete set of changes is:

What’s New

  1. Added support for Amazon Cloud Drive.

Improvements

  1. Improved WebDAV compatibility.

Fixed issues

  1. Fixed an issue where S3 subfolders might not be correctly displayed.
  2. Fixed an issue where token expiration is not duly notified in certain conditions.
  3. Fixed an issue where an expired access token might lead to a syncing loop.
  4. Updated Yandex Disk icon.

I applied the update to both my test NAS, a DS212+, and my production NAS, a DS1815+, without a problem. But I don’t use any of the affected services such as S3. Microsoft OneDrive, Google Drive, and Dropbox all seem unaffected.

DSM 5.2 Update 2 Released By Synology

Synology has released Update 2 for DSM 5.2

Synology has released Disk Station Manager 5.2 Update 2 and is calling it DSM 5.2-5565 Update 2. While there are some security fixes there’s nothing major. Unless, of course, you’re impacted by one of the bugs that have been fixed.

Synology has also stated that they reviewed DSM and their implementation of OpenSSL is not vulnerable to the LogJam vulnerability.

The complete list of documented fixes is:

  1. Improved the stability of SHR expansion.
  2. Improved the stability of SMB transfer when the system is being accessed by an excessive number of clients.
  3. Fixed multiple kernel vulnerabilities (CVE-2014-3122, CVE-2014-3153, CVE-2014-0196, and CVE-2014-4699).
  4. Fixed an issue where CPU usage could remain high when widget is enabled.
  5. Fixed an issue where LDAP users could fail to log in to DSM.
  6. Fixed an issue where files could not be downloaded via Windows’ terminal.
  7. Fixed an issue where system cannot enter hibernation.
  8. Fixed an issue where some folders with non-English names would become inaccessible via SMB.
  9. Fixed an issue where volumes/iSCSI LUN cannot be displayed after the Synology High Availability system resumes from safe mode with UPS connected.

I installed the update on a DS1815+, DS415+, DS212+ and DS1511+ without any issues. It does reboot the NAS

Synology Updates Cloud Station

Synology has released a minor update to Cloud Station with 8 documented fixes.

Synology released Cloud Station 3.2-3479 for DSM 5.2. I installed the update on my DS1815+ without any problems. It automatically and silently updated the client software running on my Macs. (I don’t have any Windows machines currently running Cloud Station but it should automatically update those too.)

Documented fixes include:

  1. Fixed an issue that might caused high CPU usage using QuickConnect connection.
  2. Fixed an issue where proxy setting cannot be enabled.
  3. Fixed an issue where an expired certificate might cause verification failure.
  4. Fixed an issue where certain domain users cannot be properly enabled.
  5. Fixed an issue that might cause high CPU usage on Mac computers after rebooting.
  6. Fixed an issue where shared folder list cannot be displayed in certain QuickConnect connection.
  7. Fixed an issue where admin users cannot restore and download historic versions without Cloud Station privilege.
  8. Fixed an issue to support directories with brackets.

I have never encountered any of the problems so I can’t say whether or not they are actually fixed.

Synology Updates Download Station

Synology has released an update to their Download Station package. I contains bug fixes, no new features.

Synology has released an update for Download Station which brings it to version 3.5-2956. The changes include:

Version: 3.5-2956

  1. Fixed an issue where BT download tasks would not work properly.
  2. Fixed an issue where HTTP links containing certain characters could not be downloaded.
  3. Fixed an issue where download tasks from file hosting sites would not be performed properly.
  4. Fixed an issue where BT/eMule would generate ‘access denied’ logs when the port number is below 1024.
  5. Minor bug fixes.

I updated download station without a issue. I don’t use Download Station enough to know if these, or any other issues, were fixed. But if you use it you should grab the update.

Synology Updates DSM 5.2

Synology DSM 5.2 has been out only a matter of days but DSM 5.2 Update 1 is already out. It mainly includes security updates but there are a few bug fixes too,

DiskStation Manager 5.2 (DSM 5.2) has only been out a few days but they already released an update. DSM 5.2 Update 1 has been released.

The documented changes include:

Fixed Issues

  1. Fixed an issue where users could fail to join domain when the domain admin account contains specific characters.
  2. Improved the compatibility with USB devices.
  3. Fixed a security vulnerability to prevent cross-site scripting attacks (XSS).
  4. Upgraded PHP to 5.5.25 to address multiple security vulnerabilities (CVE-2006-7243, CVE-2015-4021, CVE-2015-4022, CVE-2015-4024, CVE-2015-4025, CVE-2015-4026).
  5. Improved the compatibility with 3rd party DTV applications.
  6. Fixed an issue where SSD cache volume information may not be displayed correctly in Resource Monitor.
  7. Fixed an issue where users with guest accounts would be unable to create new files or folders via SMB protocol.

I haven’t encountered any of these issues in the short time I’ve been using DSM 5.2. I will be setting up a SSD cache in a week or so and the security fixes are always welcome so I immediately applied the update.

I applied the update to a DS1815+, DS415+ and DS212+ Synology NAS without having a problem. The update only took a couple of minutes but it did require a NAS reboot.

Synology Updates Photo Station and Video Station.

Synology updated both Photo Station and Video Station. No new funtionality but they are needed for security and compatibility.

Synology has released updates to Photo Station and Video Station.

Photo Station is up to version 6.2-2945. The changes are covered in one line:

  1. Security Enhancements

Video Station is up to version 1.5-0754. Again, the changes are covered in one line:

  1. Upgraded to be compatible with DSM 5.2-5565 update 1

I applied both updates to my Synology DSM 5.2-5565 NAS (the base DSM 5.2 installation) without an issue. I applied the update before DSM 5.2 Update 1 since the Video Station update was needed for compatibility.

 

Synology Releases DiskStation Manager 5.2

Synology has released DSM 5.2. My upgrade from the 5.2 beta had some hiccups but the upgrade from DSM 5.1 was problem free.

Synology feature image tile - blackToday Synology Released DiskStation Manager 5.2 (a.k.a. DSM 5.2). I’ve been running the beta version since it was released and I’ve liked it. The beta has been problem free, at least for me, although the upgrade from the beta wasn’t. My problems appear beta related as a second Synology NAS, that was running the latest DSM 5.1, not the beta, didn’t have any problems.

The process I follow for upgrades is fairly straight-forward:

  1. Update all installed packages to the latest version available.
  2. Download and update DSM through the Control Panel.

The only beta upgrade issue I consider serious is that CloudSync no longer starts because of some version confusion1. After updating to DSM 5.2 the CloudStation package won;t start because it says it’s incompatible with the installed DSM version. The package won’t update because it’s a higher version number than what’s available for installation. The installed version is 1.0-0327 while the version available for install is 1.0-0263 and dates back to December 2014. I’m hoping Synology is just slow in updating the repository or can quickly update the version check and the package actually works. I’m going to give them a few days before I uninstall and then re-install the package. I’m concerned that the re-install will force a new sync which I’d prefer to avoid. [Updated 5/13 – Sure enough, the CloudSync package had an update waiting this morning and it’s fine after the update.]

The beta upgrade did not re-start any of the packages. Some started manually but some did not so I rebooted the NAS and they all started.

Neither of these problems occurred when I updated from DSM 5.1 to DSM 5.2.

There’s a long list of updates. Here’s what they’ve chosen to highlight. The full software specs are here.

Most iOS, and I assume Android, apps were also updated.

  1. CloudSync is not CloudStation, CloudSync synchronizes with with Cloud Services such as DropBox and OneDrive.

Synology DSM 5.1-5021Released & Apps Updated

Synology has updated DSM 5.1 and several of their packages.

Synology has updated DiskStation Manager 5.1 to version 5.1-5021. The update includes (from the Synology DSM release notes):

Version:5.1-5021     
What’s New

This update includes all bug fixes as well as security fixes in the previously released critical updates since DSM 5.1-5004.
Fixed Issues

  • Enhanced data security by disabling “Mount automatically on start-up” after restoring an encrypted shared folder.
  • Fixed a vulnerability that allows senders to access unintended destinations during a backup job.
  • Enhanced stability on Amazon S3 on large file backup.
  • Upgraded OpenVPN to 2.3.6 to address a security vulnerability.
  • Fixed a vulnerability that allows local users to initiate a denial of service by queuing the maximum number of file descriptors (CVE-2014-7824).
  • Upgraded PHP to 5.5.19 to address multiple vulnerabilities (CVE-2014-3669, CVE-2014-3670, CVE-2014-3668, and CVE-2014-3710).
  • Improved DTV dongle compatibility.
  • Improved file-copying stability on DS2015xs.
  • Fixed an issue where DS213+ and DS413 could power up unexpectedly when backup tasks are scheduled.
  • Minor bug fixes.

Synology has also updated many of their packages (a.k.a. applications) with minor enhancements and bug fixes. Of the packages I use, the following have been updated:

  • Audio Station
  • Cloud Station
  • Cloud Sync
  • Download Station
  • Note Station
  • Video Station

All the changes are minor, the only one I personally noticed is that Note Station now sorts the Notebooks in the sidebar list which makes them easier to find.

I updated both my Synology DS415+ and Synology DS212+ without having a problem.

 

Synology Releases DSM 5.1-5004 Update 2

Synology has release Update 2 for DSM 5.1

Twenty three days after the official release of DSM 5.1 Synology has released an update.

Version : 5.1-5004 Update 2

(2014/11/29)
Fixed Issues:

  1. Fixed an issue that could cause a false alarm in Security Advisor after upgrading to DSM 5.1-5004 Update 1.
  2. Fixed an issue where Firewall rules did not apply correctly.
  3. Fixed a security issue that could allow remote attackers to cause a denial of service via a crafted ECC certificate or certificate signing requests (CVE-2014-8564).
  4. Enhanced HA stability on system updates.
  5. Fixed an issue where DS213+ and DS413 could fail to execute scheduled tasks after entering system hibernation.
  6. Fixed the send-mail function in PHP.
  7. Fixed an issue where packages failed to start or users were unable to install packages on entry models.
  8. Fixed an issue where CGI cannot be executed in Web Station.
  9. Fixed an issue where DSM mobile was not correctly displayed on Chrome v39 on mobile devices.
  10. Fixed an issue where installation of digitally-signed packages could fail on EDS14.
  11. Improved QuickConnect mechanism on complex network environment.
  12. Fixed an issue where scheduled power-off function could fail to execute when DSM Auto Update was enabled.
  13. Fixed an issue where false warning could display in System Health on Play-series.
  14. Fixed “Customzie PHP open_basedir” function to accept directories that have not been created.
  15. Enhanced security on SSH/Telnet connections.
  16. Fixed an issue where EDS14 could fail to apply updates.

The update is available through automatic update in control panel. Like all firmware updates a reboot is required.

DSM Control Panel showing available update

The update took less than 10 minutes each on my DS415+ NAS, DS212J and DS212+.